This article mainly introduces:

Hungary hydraulic cylinder,servo hydraulic cylinder manufacturer,servo hydraulic cylinder

(Hungary servo hydraulic cylinder,produced by Hebei Hengyu company）

servo hydraulic cylinder are widely used in Hungary，because of excellent temperature resistance，clever hydraulic energy conversion，simple structure and reliable operation.So our company has designed servo hydraulic cylinder for customers from Hungary.

Introduction to servo hydraulic cylinder:

The servo hydraulic cylinder can not be used as grounding electrode to avoid electric damage to the piston rod.

The servo hydraulic cylinder should not be mixed with foreign objects during assembly, which will cause scars. Before the total assembly of the servo hydraulic cylinder, all parts must be fully removed and cleaned. When the parts are installed with burrs or dirt, foreign objects are easily embedded into the surface of the servo hydraulic cylinder wall due to the stiffness and the weight of the parts, causing scars.

The material, shape and compression of the servo hydraulic cylinder seal have a great impact on the service life and work efficiency of the servo hydraulic cylinder. In addition to requiring a reliable seal, it should also have a long service life and less friction loss. At present, there are many seal manufacturers in the country, and it is also crucial to choose high-quality seals with reliable and stable quality.

servo hydraulic cylinder installation precautions: Before installing the servo hydraulic cylinder into the system, the parameters on the servo hydraulic cylinder label should be compared with the parameters when ordering. The base of the servo hydraulic cylinder must have sufficient stiffness, otherwise the servo hydraulic cylinder will bend upward into a bow when pressurized, so that the piston rod will bend.

Answers to some questions about servo hydraulic cylinder:

Why is the hydraulic cylinder of the larger excavator arm upside down?
The weight of the excavating arm of a large excavator will be very heavy, and an oil cylinder has two cavities, one is a rod cavity, and the other is a rodless cavity. The lifting force of the excavator is the product of the ortho-projection area of the piston rod cavity by the oil pressure, so the strength of the rodless cavity is much greater than that of the rod cavity. And the parallel bars with the piston rod facing down are also conducive to assembly and future maintenance. So a large excavator has to keep the cylinder facing down.

What are the connection methods of the hydraulic cylinder? The connection modes of the cylinder and the actuator are earring connection, hinge shaft connection, thread connection, etc. The connection modes of tubing and cylinder are threaded connection, flange connection, etc.