This article mainly introduces:

Argentina hydraulic cylinder,steering power cylinder manufacturer,steering power cylinder

(Argentina steering power cylinder,produced by Hebei Hengyu company）

steering power cylinder are widely used in Argentina，because of excellent temperature resistance，no transmission clearance，powerful torque.So our company has designed steering power cylinder for customers from Argentina.

Introduction to steering power cylinder:

When the steering power cylinder needs to be disassembled for maintenance due to leakage and other faults, the piston should be moved to the bottom position of the steering power cylinder, and hard beating and sudden drop are strictly prohibited during disassembly.

The definition of the minimum starting pressure of the steering power cylinder refers to the minimum working pressure of the steering power cylinder in the no-load state, which is a comprehensive index reflecting the manufacturing and assembly accuracy of the steering power cylinder parts and the size of the sealing friction.

steering power cylinder piston sealing is best to use Yx ring, polyurethane and polytetrafluoroethylene sealing material combination, can significantly improve the sealing performance: (I), reduce friction resistance, no crawling phenomenon; (ii) Have good dynamic and static sealing, wear resistance, long service life; (iii) The installation groove is simple, and the disassembly is simple.

In the case of serious wear on the inner surface of the steering power cylinder, or when there is a deep longitudinal tensile mark, it should be mapped according to the physical object and re-produced by the professional manufacturer according to the steering power cylinder manufacturing process for replacement. The steering power cylinder can also be repaired with TS311 antiwear repair agent. TS311 anti-wear repair agent is mainly used for the repair of worn and slipped metal parts.

Answers to some questions about steering power cylinder:

What are the differences between hydraulic cylinder and pneumatic cylinder, what are their advantages and disadvantages?
Hydraulic Cylinder: small body and large force, constant speed and variable speed (easy to change), the adjustment of output is also convenient, and the degree of freedom of transmission is high. However, maintenance costs and installation costs are high, and there is the trouble of mild oil pollution. Pneumatic Cylinder: easy to control, low price, easy access to energy. But the force is small, and can not achieve the effect of stable speed. The gas-liquid pressurized cylinder has the advantages of both of the above: environmental protection and energy saving, easy control, and simple adjustment. However, the output of the trip has certain restrictions, so it is more suitable for short trips, large output, but also environmental protection and energy saving and low configuration of the occasion. Because the pressure used in the pneumatic system is generally in the range of 0.2-1.0Mpa, the cylinder is not suitable for high power component.

What are the functions of hydraulic cylinders?
Hydraulic cylinder is a hydraulic actuator, the specific role depends on the installation occasion and the type of hydraulic cylinder. Hydraulic cylinder is mainly used in machinery, and it is the most important component of construction machinery. It is important core component which mainly provide power for machinery.