This article mainly introduces:

Thailand hydraulic cylinder,vehicle hydraulic cylinder manufacturer,vehicle hydraulic cylinder

(Thailand vehicle hydraulic cylinder,produced by Hebei Hengyu company）

vehicle hydraulic cylinder are widely used in Thailand，because of clever hydraulic energy conversion，simple structure and reliable operation，excellent temperature resistance.So our company has designed vehicle hydraulic cylinder for customers from Thailand.

Introduction to vehicle hydraulic cylinder:

The vehicle hydraulic cylinder requires that the filtration accuracy of the system is not less than the 80um, and the oil pollution should be strictly controlled, the oil should be kept clean, the performance of the oil should be checked regularly, and the necessary fine filtration and replacement of new working oil should be carried out.

When purchasing the vehicle hydraulic cylinder, try to clarify the following parameters of the vehicle hydraulic cylinder: A. vehicle hydraulic cylinder diameter, rod diameter, stroke; B. Working pressure or vehicle hydraulic cylinder load; C. Working environment temperature; D. Working medium; E. Operating speed; F. Other parameters, such as connection form, mounting size, etc. In this way, the right vehicle hydraulic cylinder type can be found accurately and quickly.

When the vehicle hydraulic cylinder is installed on the main engine, the oil port piping part and the guide sleeve should be checked for oil leakage in the running test, and the earring and the middle hinge shaft bearing should be refueled.

vehicle hydraulic cylinder installation precautions: Before installing the vehicle hydraulic cylinder into the system, the parameters on the vehicle hydraulic cylinder label should be compared with the parameters when ordering. The base of the vehicle hydraulic cylinder must have sufficient stiffness, otherwise the vehicle hydraulic cylinder will bend upward into a bow when pressurized, so that the piston rod will bend.

Answers to some questions about vehicle hydraulic cylinder:

What are the main dimensions of the cylinder?
The main dimensions of the cylinder include: cylinder inner diameter, piston cylinder diameter, cylinder length, cylinder wall thickness, stroke, installation distance, etc.

Can multiple identical hydraulic cylinders be supplied with the same supply line?
This can be connected, but there is a disadvantage, that is, the hydraulic cylinder with the minimum pressure is extended first, and then the pressure is higher, and then the higher, until all the hydraulic cylinders are extended, which may not meet the requirements of field use.