This article mainly introduces:

Sudan hydraulic cylinder,road paving machine hydraulic cylinder manufacturer,road paving machine hydraulic cylinder

(Sudan road paving machine hydraulic cylinder,produced by Hengyu Group）

road paving machine hydraulic cylinder are widely used in Sudan，because of powerful torque，clever hydraulic energy conversion，no transmission clearance.So our company has designed road paving machine hydraulic cylinder for customers from Sudan.

Introduction to road paving machine hydraulic cylinder:

The scar on the sliding surface of the road paving machine hydraulic cylinder piston will transfer with use. Before the piston is installed, there are scars on its sliding surface, which are installed intact and untreated, and these scars will in turn scratch the inner surface of the road paving machine hydraulic cylinder wall. Therefore, before installation, these scars must be fully repaired.

When purchasing the road paving machine hydraulic cylinder, try to clarify the following parameters of the road paving machine hydraulic cylinder: A. road paving machine hydraulic cylinder diameter, rod diameter, stroke; B. Working pressure or road paving machine hydraulic cylinder load; C. Working environment temperature; D. Working medium; E. Operating speed; F. Other parameters, such as connection form, mounting size, etc. In this way, the right road paving machine hydraulic cylinder type can be found accurately and quickly.

The material, shape and compression of the road paving machine hydraulic cylinder seal have a great impact on the service life and work efficiency of the road paving machine hydraulic cylinder. In addition to requiring a reliable seal, it should also have a long service life and less friction loss. At present, there are many seal manufacturers in the country, and it is also crucial to choose high-quality seals with reliable and stable quality.

road paving machine hydraulic cylinder can not drive the load troubleshooting: oil pressure is too low. road paving machine hydraulic cylinder selection specifications are too small. Leakage in road paving machine hydraulic cylinder or associated hydraulic system element.

Answers to some questions about road paving machine hydraulic cylinder:

Why is the cylinder not in place when the concrete pump truck changes the piston?
When the concrete pump truck changes the piston, the cylinder is not in place mainly because the transfer oil connecting the two cylinders is not completely drained. Sany and Zhonglian have a piston return switch, which can be used to back the piston to the cleaning tank. The elephant is equipped with a stop valve at the bottom of the oil cylinder, usually in the closed state, when opened, the piston can be returned to the cleaning tank, remember to close the valve after the piston is updated.

Loader arm fell badly, how to know which oil cylinder is leaking?
No matter which cylinder leakage the arm will drop, it is best to replace the oil seal, even if one cylinder is good, it will not last long, and it will drop the arm, so the two cylinders should be replaced at once.